Troubleshooting a Cluster
To find out if
csyncd is operational, proceed as follows:
Browse the ALOHA WUI and open the Setup tab.
Look for the Remote Configuration area.
The Current status table reports the synchronization capability of the cluster:
A red LED means synchronization does not work
An orange LED or a green LED means synchronization is operational
If the LED is red, run the steps below to troubleshoot:
Power on both ALOHAs.
Check that both ALOHA WUIs listen on the same TCP port and on the same protocol scheme (HTTP or HTTPs).
Check that both ALOHAs can ping each other.
csyncdservice is started on both ALOHAs, i.e. green LED in the Services tab.
Next upTroubleshooting Network Interfaces